| Vehicle: |
Silverado |
| Track: |
Bristol Motor Speedway |
| Layout: |
Oval |
| Type: |
Race |
| Season: |
2009 Season 1 |
| Wheel/Controller: |
Not Specified |
| Original Creator: |
Marcus Caton |
| Uploaded By: |
Marcus Caton |
| Times Downloaded: |
1659 |
| Best Time: |
00:00:000 |
|
The setup is good fast but mainly depends on how you drive it. My race line consist of me driving it in kinda hard. getting on the brakes a little then right back on the gas while wheeling it off the corner.
Currently the bias in the set is at 50% you can change it to 60+ etc to whatever suits you better. If you slam on the brakes with it at 50 you'll be making your own around the world video, so be careful at 50 but change to 60 to be safe if you like.
The gear revs out on corner entry it allows me to keep my race line in check but in the draft you might loose your engine, ive had that happen to me not too long ago, with that said the set prefers being out front but maybe that's me not sure, you can get a tad loose below someone so stay on your toes, if the gear is too low for you take it down 1 click should do fine.
Lastly im not sure how loose the set will feel to most but to me its loose without being too loose and tight without being too tight so just right for me , might be different for you guys so if its too loose or too tight let me know and i will suggest a few changes etc.
GL out there guys im sure we will see less cautions with the slower guys running my set....pft well hopefully we will see less cautions none the less even if were at Bristol moving on good luck.
Almost forgot im running around .6s for a bit it won't drop of hard at all depend son how hard you drive it. |
|